Charcoal is a form of carbon and it can be used for many things. One thing that charcoal can do is remove impurities from water.
The use of charcoal is a very interesting and important topic that has been one of the most effective ways to clean water for drinking or cooking purposes.
Charcoal acts as a purifier for water, which helps you to remove bad odor, color, and even chemicals from the water.
Charcoal is made from wood or other organic substance and has been used as a method of cleaning water for hundreds of years.
This material helps filter out chemicals, microorganisms, and many other impurities that can be found in drinking water.
The use of charcoal in the purification process is not a new idea and has been applied for many years after it was used to filter water during World War II.
The industrial revolution made it easier to produce activated charcoal powder at industrial levels, which led to widespread usage of this system around the world.
Methods to Filter Water with Charcoal
The significance of using activated charcoal to filter water is that it can be reused for up to 6 months before you replace the whole container with a new one.
The charcoal powder needs some time to settle down on its own, so do not worry if the water has black particles in it for the first few uses.
Make sure to drink this filtered water within 24 hours or store it properly in an airtight container. Following are the two unique methods for filtering water with charcoal:
1. Find a container to hold the charcoal and water. You will need one big enough so you can pick it up and pour any excess liquid back in when you’re done (for example a two-liter bottle).
You can also put the container in another container that fits inside to hold the charcoal and water without spills.
2. Place about 2 inches of charcoal into your container. Use more if you want but note that more charcoal may take longer to work.
Also, make sure you do not pack down the charcoal because you want it to be able to move around and react with the water.
3. Pour your unfiltered water into the container so that it settles above the charcoal, making sure not to disturb what you just put in there.
4. Cover the opening of the container with a small material, for example, cheesecloth or pantyhose. This is to keep the charcoal in while allowing the water to filter out.
5. Wait for an hour or so and then pour your filtered water into another container, making sure to leave the charcoal behind.
Your container of charcoal will be left with many impurities that can be thrown away. Also, remember to wash the container you used to hold the charcoal and water.
6. Use your filtered water for anything you need it for, whether it is to drink or use in cooking. You can also save the charcoal that you left behind and reuse it.
Just repeat steps two through five again with the new charcoal to remove any remaining impurities from your container of filtered water
Let us see how to use charcoal to filter water at home:
Amount of Charcoal
Determine the amount of charcoal you will need. Firstly, prepare yourself to fill a standard size glass with water and then pour it into a bowl.
After that, take some pieces of charcoal and measure them with your fingers. The color grey is the delicate sign as per the scientists to recognize sufficiently activated charcoal for this purification system.
Now, boil 2 to 3 liters of water in a pot for 5 minutes or until you get steam. The boiling helps deactivate any microorganisms that may be found in the room temperature water.
After that, strain the boiled water through a cheesecloth into another pot to remove any residues before your pour it into a glass.
Mixing of Water and Charcoal Powder
Stir the mixture thoroughly to create a paste-like substance, which has an even consistency all around the pot. Leave it for 30 minutes at room temperature for the substance to turn into carbon.
After that, add some more boiled water after straining through the cheesecloth again and stir thoroughly once more.
Filter the mixture
Allow the mixture to sit for a few minutes before you start filtering it. Pour the filtered water into a glass and drink it as soon as possible or store it in a clean bottle.
You can also use this homemade filter for cooking purposes, but make sure to boil the water first again after filtering through charcoal.
This purification system does not use chemicals or any other additional elements, which makes it more beneficial for the environment.
You can find activated charcoal at affordable prices and use it as per the above instructions to take advantage of this natural purification process.
Activated charcoal needs some time to settle down on its own, so replace your container after 6 months or when the water starts to taste differently.
Benefits of Using Charcoal Water Filters
1. Removes bad odor.
2. Removes heavy metals like aluminum, arsenic, cadmium, chromium 6, and mercury.
3. It is better than water filtration because it acts as a pre-filter to save up on the costs of replacement filters. Charcoal filtering also allows the system to run more efficiently.
4. Removes chlorine. Chlorine is used in drinking water not only to kill harmful bacteria but also to keep the water from going bad over time.
5. Removes up to 99 percent of pharmaceuticals such as ibuprofen, caffeine, acetaminophen, and estrone found in drinking water that pass through the process of purification.
6. It is cost-effective. Unlike water filtration that needs new filters every three months which can be costly, charcoal filtering does not need you to buy replacement filters or cartridges.
7. Removes fluoride. Fluoride is added to drinking water to reduce the number of cavities people get, but it has been known to cause ill effects on health. One of these is bone cancer and another one is arthritis.
8. Improves the taste of your drinking water. Once you have tried charcoal filtering for your drinking water, you will never want to go back to tap water again.
9. Saves up on cleaning costs for appliances – Instead of having to pay money and buy expensive cleaning chemicals, you can now use charcoal filtered water to clean the appliances such as dishwashers and washing machines.
10. Great for cooking as you can now easily clean vegetables and meat by boiling them on charcoal filtered water. It also retains the natural taste and flavor of food making it delicious.
The charcoal powder is a natural purifier that can be used to filter water for drinking or cooking purposes. You can find plenty of activated charcoal at any local health store and use it as per the steps described above to take advantage of its excellent filtering quality.
Charcoal has been scientifically proven as an effective purification system for water, so there should be no doubts about its credibility.
You can also add some extra flavor to your filtered water by adding a few drops of lemon, orange, or any other fruit juice to the clean water.
Charcoal works efficiently as a natural purifier and does not alter the flavor or bad odor of water. This homemade purification method is safe for children and adults alike.
I hope this article would have proven to be beneficial for you and I am expecting to receive interesting responses in the comment section of this article.
Clare Smyth has an attraction towards the kitchen, and that’s clear. She is very passionate about writing reviews on kitchen products and working under Steve to research new advances in the kitchen.